A13EM4H4G24
From Technical Support Wiki
A13CH4H4G24 is the 13 SEER 24,000 Btu mini split in the Bronze Series line.
Remote Control
| Button Name | Description |
|---|---|
| OPERATION MODE Indicator | Indicates selected operation mode. |
| FAN SPEED Indicator | Indicates the selected Air Rate. |
| TIME Indicator | During TIMER operation indicates the timer. During normal operation, it indicates the time. |
| SET TEMPERATURE | This button sets the room temperature. |
| SLEEP | This button changes to SLEEP operation. |
| AUTOSTART | This button is used for timing the AUTOSTART function. |
| AUTOSTOP | This button is used for timing the AUTOSTOP function |
| TEMPERATURE Indicator | Indicates the set temperature. |
| AIR FLOW Indicator | Indicates the selected flap mode. |
| ON/OFF | Controls the powered state of the mini split. |
| VANE CONTROL | This button changes the flap mode. |
| MODE | This button, whenever pressed, changes the operation mode in the following order: Auto->Cool->Dry->Heat->Fan. |
| FAN SPEED | This button sets the air rate. |
| SWING | This button adjusts the air swinging direction. |
| TIME SET | These two buttons are used for setting the time as well as autostart and stop times. |
| Number | Part Name |
|---|---|
| 1 | Wall-Mounting Frame |
| 2 | Base |
| 3 | Cross Flow Fan |
| 4 | Cross Flow Fan Bearing |
| 5 | Ring of Cross Flow Fan Bearing |
| 6 | Room Temp Sonde Frame |
| 7 | Evaporator Assembly |
| 8 | Evaporator Fixed Plate |
| 9 | Electric Heater |
| 10 | Outlet Part |
| 11 | Louver A |
| 12 | Louver B |
| 14 | Bearing D |
| 16 | Swing Louver (Little) |
| 19 | Louvers |
| 20 | Supply Grill |
| 21 | Middle Frame |
| 22 | Screw Cover |
| 23 | Cold Catalyst |
| 24 | Left Air Filter |
| 25 | Right Air Filter |
| 26 | Front Panel |
| 27 | Line and Drain Cover |
| 28 | Blower Motor Cover |
| 29 | Motor |
| 30 | Motor Clamp |
| 31 | Electric Box |
| 32 | Electric Box Bottom Cover |
| 33 | Electric Box Front Cover |
| 35 | Board Base |
| 36 | Display Lamp Frame |
| 37 | Room Temp Sensor |
| 38 | Tube Temp Sensor |
| 39 | Sensor Cover |
| 40 | Power Wire |
| 41 | Terminal Board |
| 42 | Connecting Cable |
| 43 | Thermal Insulation Pipe |
| 52 | Step Motor |
| 53 | Bearing A |
| 54 | Bearing B |
| 55 | Wire Clip |
| 56 | Water-Resistant Board |
| 58 | Bearing C |
| 59 | Step Motor |
| 61 | Display Box |
| 62 | Display Lamp Panel |
| 63 | Remote Controller |