A18EM4H4R18

From Technical Support Wiki
Revision as of 20:06, 10 December 2013 by ACINT (talk | contribs)
Jump to: navigation, search

A18EM4H4R18 is the 18 SEER 18,000 Btu indoor unit of the Platinum Series.

Platinum Series evaporator (18k)

Remote Control

Remote Control
# Name Description
1 ON/OFF Press to start or stop operation
2 MODE Press to slect operation mode (Auto/Cool/Dry/Fan/Heat)
3 + (Raise) Press to raise the temperature setting
4 - (Lower) Press to lower the temperature setting
5 FAN Press to set fan speed
6 SWING ANGLE Press to set swing angle
7 TIMER ON Press to set auto-on timer
8 TIMER OFF Press to set auto-off timer
9 CLOCK Press to set clock
10 X-FAN Pressing X-FAN button in COOL or DRY mode, the icon is displayed and the indoor fan will continue operation for 10 minutes in order to dry the indoor unit even though you have turned off the unit.
11 TEMP Press to cycle through Set Temp/Indoor Ambient Temp/Outdoor Ambient Temp
12 TURBO Press to initiate the "Turbo" funciton
13 SLEEP Press to initiate Sleep mode
14 LIGHT Press to turn on/off backlight

Wiring Diagram

A18EM4H4R18 Wiring Diagram

Exploded View and Parts List

A18EM4H4R18 Exploded View
Number Part Name
1 Front Panel Assy
2 Filter Sub-Assy
3 Screw Cover
4 Baffle Plate
5 Front Case Sub-Assy
6 Air Louver 1
7 Air Louver 2
8 Helicoid Tongue
9 Left Axile Bush
10 Rear Case Assy
11 Rubber Plug (Water Tray)
12 Ring of Bearing
13 O-Gasket of Cross Fan Bearing
14 Cross Flow Fan
15 Evaporator Support
16 Evaporator Assy
17 Wall Mounting Frame
18 Motor Press Plate
19 Fan Motor
20 Connecting Pipe Clamp
21 Drainage Hose
22 Stepping Motor
23 Crank
24 Display Board
25 Mesh Enclosure (Air Outlet)
26 Guide Louver
27 Axile Bush
28 Electric Box
29 Terminal Board
30 Electric Box Cover 2
31 Main Board
32 Shield Cover of Electric Box
33 Electric Box Cover 1
34 Jumper
35 Capacitor
36 Electric Box Assy
37 Temperature Sensor
38 Temperature Sensor
39 Remote Controller