Difference between revisions of "ASREM4H4S12"

Revision as of 16:36, 10 November 2017

ASREM4H4S12 is the 17 SEER 12,000 Btu indoor unit of Serene Series.

Serene Series evaporator (12k)

#	Name	Description
1	ON/OFF	Press to start or stop operation.
2	MODE	Press to select operation mode (Auto/Cool/Dry/Fan/Heat).
3	FAN	Used to select the fan speed in sequence: auto, high, medium, or low.
4	ROOM TEMPERATURE SETTING	Press to raise the temperature setting. Can also be used to adjust the timer and adjust the current time.
5	ROOM TEMPERATURE SETTING	Press to lower the temperature setting. Can also be used to adjust the timer and adjust the current time.
6	SMART	Adjust smart settings.
7	SWING	Used to stop or start vertical adjustment louver swinging and set the desired up/down airflow direction.
8	SLEEP	Used to set or cancel Sleep Mode operation.
9	IFEEL	Used to set IFEEL operation.
10	CLOCK	Used to set the current time.
11	TIMER ON	Used to turn the timer function on.
12	TIMER OFF	Used to turn the timer function off.
13	SUPER	Used to start/stop the super cool/heat function. (Super cooling operates at high fan speed with a default 64 F temperature setting. Super heating operates at high fan speed with a default 89 F temperature setting.)
14	DIMMER	Pressing this button will dim the display on the indoor unit. Pressing any button will reverse the dimmer.

ASREM4H4S12 Wiring Diagram

ASREM4H4S09 PCB Printed Diagram

Number	Description
1	PG Motor Interface
2	Room temperature sensor
3	Pipe temperature sensor
4	Switch buton
5	Feedback from PG Motor
6	Up & down swing
7	Left & right swing
8	Wiring control or Wifi interface
9	Display interface
10	Protective tube

@@ Line 64: / Line 64: @@
 |}
 == Wiring Diagram ==
-[[File:Blue2-9-12k-IDU-WDF.png|none|thumb|500px|ASREM4H4S09 Wiring Diagram]]
+[[File:Blue2-9-12k-IDU-WDF.png|none|thumb|500px|ASREM4H4S12 Wiring Diagram]]
 == PCB Printed Diagram ==