Difference between revisions of "A16CI4H4R36"
From Technical Support Wiki
(Created page with "== Malfunction Information Table == {| class="wikitable" | rowspan="2"|Name of Malfunction | Display of indoor unit | colspan="3"|State of the lamps on the outdoor unit PCB | ...") |
|||
| Line 12: | Line 12: | ||
| Reasons | | Reasons | ||
|- | |- | ||
| + | | Compressor running (normal) | ||
| + | | | ||
| + | | blink 1 time | ||
| + | | | ||
| + | | | ||
| + | | Part of normal operation | ||
| + | |- | ||
| + | | Automatic defrosting (normal) | ||
| + | | H1 | ||
| + | | blink 2 times | ||
| + | | | ||
| + | | | ||
| + | | Part of normal operation | ||
| + | |- | ||
| + | | Anti-freezing protection | ||
| + | | E2 | ||
| + | | blink 3 times | ||
| + | | | ||
| + | | | ||
| + | | Refrigerant leakage / indoor unit airflow blocked up / filter duty | ||
| + | |- | ||
| + | | Stop for IPM module protection (over current) | ||
| + | | H5 | ||
| + | | blink 4 times | ||
| + | | | ||
| + | | | ||
| + | | IPM model over current / outdoor unit air flow blocked up | ||
| + | |- | ||
| + | | Stop for over current protection | ||
| + | | E5 | ||
| + | | blink 5 times | ||
| + | | | ||
| + | | | ||
| + | | Outdoor unit over current / ambient temperature is abominable | ||
| + | |- | ||
| + | | Overload protection | ||
| + | | H4 | ||
| + | | blink 6 times | ||
| + | | | ||
| + | | | ||
| + | | Ambient temperature is abominable / heat exchanger is blocked up | ||
| + | |- | ||
| + | | Stop for exhaust protection | ||
| + | | E4 | ||
| + | | blink 7 times | ||
| + | | | ||
| + | | | ||
| + | | low refrigerant / capillary blocked up / ambient temperature is abominable | ||
| + | |- | ||
| + | | Stop for compressor overload protection | ||
| + | | H3 | ||
| + | | blink 8 times | ||
| + | | | ||
| + | | | ||
| + | | Compressor shell overheat / low refrigerant / capillary blocked up | ||
| + | |- | ||
| + | | Stop for overpower protection | ||
| + | | L9 | ||
| + | | blink 9 times | ||
| + | | | ||
| + | | | ||
| + | | Ambient temperature is abominable | ||
| + | |- | ||
| + | | Stop for IPM module protection (overheat) | ||
| + | | H5 | ||
| + | | blink 10 times | ||
| + | | | ||
| + | | | ||
| + | | IPM module overheat / outdoor unit airflow blocked up | ||
| + | |- | ||
| + | | Stop for EEPROM read-write function | ||
| + | | EE | ||
| + | | blink 11 times | ||
| + | | | ||
| + | | | ||
| + | | The EEPROM on the outdoor PCB mainboard cannot read or write | ||
| + | |- | ||
| + | | | ||
| + | |||
| + | |||
| + | |||
|} | |} | ||
Revision as of 17:01, 12 November 2013
Malfunction Information Table
| Name of Malfunction | Display of indoor unit | State of the lamps on the outdoor unit PCB | |||
| Error Code | Yellow | Red | Green | Reasons | |
| Compressor running (normal) | blink 1 time | Part of normal operation | |||
| Automatic defrosting (normal) | H1 | blink 2 times | Part of normal operation | ||
| Anti-freezing protection | E2 | blink 3 times | Refrigerant leakage / indoor unit airflow blocked up / filter duty | ||
| Stop for IPM module protection (over current) | H5 | blink 4 times | IPM model over current / outdoor unit air flow blocked up | ||
| Stop for over current protection | E5 | blink 5 times | Outdoor unit over current / ambient temperature is abominable | ||
| Overload protection | H4 | blink 6 times | Ambient temperature is abominable / heat exchanger is blocked up | ||
| Stop for exhaust protection | E4 | blink 7 times | low refrigerant / capillary blocked up / ambient temperature is abominable | ||
| Stop for compressor overload protection | H3 | blink 8 times | Compressor shell overheat / low refrigerant / capillary blocked up | ||
| Stop for overpower protection | L9 | blink 9 times | Ambient temperature is abominable | ||
| Stop for IPM module protection (overheat) | H5 | blink 10 times | IPM module overheat / outdoor unit airflow blocked up | ||
| Stop for EEPROM read-write function | EE | blink 11 times | The EEPROM on the outdoor PCB mainboard cannot read or write | ||
|
| |||||